
Standard
The base build. Motorised blades, integrated LED and a gutter inside the frame, on a 120 mm post.
- Motorised aluminium blades, rotating 0–90°
- Single-layer blade, 131 x 32 mm
- 120 x 120 mm post
- Gutter formed into the beam, 58 x 66 mm
- Integrated LED, 24 V
- Free-standing or wall-mounted
- Dark grey RAL 7016
- White RAL 9016
- 3x3 m
- 3x4 m
- 4x4 m
- 6x4 m
Final configuration is confirmed on site before anything is quoted.
- Aluminium throughout
- Gutter integrated in the beam
- Assessed, supplied and installed by Skybass
- Warranty confirmed in writing before you commit
Description
The build the range starts from.
Aluminium blades rotate 0–90° on a motor, and the gutter is formed into the beam so closed louvers drain through the frame.
A single-layer blade on a 120 mm post. Luxury steps up to a double-layer blade and a heavier post.
Specification
| Frame | Extruded aluminium, powder-coated |
|---|---|
| Finish | Dark grey RAL7016 or white RAL9016 |
| Post | 120 x 120 x 1.4 |
| Louver blade | 131 x 32 x 1.0, single-layer |
| Gutter | 58 x 66 x 1.4, integrated in the beam |
| Blade rotation | 0–90° |
| Operation | Motorised, IP67 24 V |
| Lighting | Integrated LED, 24 V |
| Load | 30 kg/m², manufacturer rating |
| Wind | 28 m/s (100 km/h), manufacturer rating |
| Sizes | 3x3 · 3x4 · 4x4 · 6x4 m |
| Installation | Free-standing or wall-mounted |
Millimetres, width x depth x wall thickness.
Manufacturer product ratings, not a guarantee for any installation. What your site carries depends on structure, mounting, fall and exposure. We give you the figures for your exact configuration.
What decides the fit
- A fixed structure. We check footings, posts and the landing surface on site.
- Closed louvers drain into the frame gutter. That water needs somewhere to go.
- Span, post spacing and covered area are linked.
- Wind and load figures are for your exact configuration, not a generic number.
- Standard covers four fixed sizes up to 6x4 m. An opening outside those is HDL: the same system, built to order.
Installed by Skybass.

Before you inquire
Where does the water go when the louvers are closed?
Closed louvers drain into the gutter formed into the beam, so water runs through the frame rather than off the edge. That water still has to go somewhere. The fall and the discharge point are part of what we check on site before quoting.
What wind and load will it take?
The table gives the manufacturer's product ratings for this build. Those are product ratings, not a guarantee for any installation. We give you the figures for your exact configuration.
Can I have a size that is not on the list?
Yes. Standard comes in four fixed sizes; anything outside them is the same system built to order, which is HDL.
How a Sunbass Standard gets built
Tell us the space
Width, depth, and what is above and below it. A photo from where you stand is usually enough to start.
We come and measure
A site check on the actual structure, mounting surface, fall and exposure. This is what decides which build fits, and where one would not work.
Quote, drawing and dates
What it costs, what it looks like on your space, and when it arrives. Sides can be closed later with Sombra blinds, priced per side, so you can leave that open for now.
Deposit confirms it
Your sizes and colour go to manufacture. White or anthracite grey, freestanding or wall-mounted.
Manufacture and delivery
Built to the measurements from the site check, then delivered to you.
Our crew installs it
The same company that quoted it fits it. You are not handed a flat-pack and an afternoon.
Inquire about the Standard.
Tell us the opening, what it is mounting to and how the space gets used. We come back with the configuration that fits and the figures for your site.
Inquire now

