The Sunbass HDE pergola, deep louver blades open, LED between them
Sunbass Heavy Duty (Engineering)

Heavy Duty Engineering (HDE)

A different class of build: heavier section in thicker material, rotating through 150°, engineered for commercial spans.

  • 270 x 47.6 mm louver blade in 2.0 mm aluminium
  • Rotation through 0 / 50 / 100 / 150°, continuous or step
  • Telescopic linear actuator driving a rod, not a blade motor
  • 276 x 150 mm beam with the gutter formed in
  • Wall-mountable on an articulated fixation
  • LED-louver option
Frame finish
  • Dark grey RAL 7016
  • White RAL 9016
Sizes
  • Made to order

Final configuration is confirmed on site before anything is quoted.

  • Aluminium throughout
  • Gutter integrated in the beam
  • Assessed, supplied and installed by Skybass
  • Warranty confirmed in writing before you commit
Description

A different class, not a larger version.

A 276 mm beam in 3.0 mm material and a 270 mm blade, against 160 mm across the rest of the range, deeper section, thicker aluminium, carrying further between posts.

The blades run 0, 50, 100 and 150° on a linear actuator, and it wall-mounts on an articulated fixation. That is what suits commercial frontages and covered decks.

Specification
FrameExtruded aluminium, powder-coated
FinishDark grey RAL7016 or white RAL9016
Post150 x 150 x 2.0
Beam (gutter integrated)276 x 150 x 3.0
Louver blade270 x 47.6 x 2.0
Blade rotation0 / 50 / 100 / 150°, continuous or step
OperationTelescopic linear actuator
LightingLED-louver option
SizesMade to order
DetailingArticulated wall fixation; driving rod

All dimensions in millimetres, given as width x depth x wall thickness.

What decides the fit
  • A fixed structure. We check footings, posts and the landing surface on site.
  • Closed louvers drain into the frame gutter. That water needs somewhere to go.
  • Span, post spacing and covered area are linked.
  • Wind and load figures are for your exact configuration, not a generic number.
  • HDE is the build we reach for on commercial frontages and long spans, and where the structure has to hang off a wall rather than land on a post.
Our work

Installed by Skybass.

A large heavy-duty Sunbass pergola over a covered timber deck, LED between the blades and blinds down the sides
Questions

Before you inquire

How is HDE different from the rest of the range?

It is a different class of build, not a larger version of one. The beam goes to 276 x 150 in 3.0 mm material and the blade to 270 mm, against the 160 mm blade used across the rest of the range, a deeper section in thicker aluminium, carrying further between posts.

Can it work where there is no room for a post on one side?

That is what the articulated wall fixation is for. HDE is wall-mountable, which is what makes it work over commercial frontages, restaurant terraces and covered decks where a post on one side is not an option.

What warranty does it carry?

Cover varies by system and project scope. You get exactly what yours carries, in writing, before you commit.

From here to finished

How a Sunbass HDE gets built

  1. Tell us the space

    Width, depth, and what is above and below it. A photo from where you stand is usually enough to start.

  2. We come and measure

    A site check on the actual structure, mounting surface, fall and exposure. This is what decides which build fits, and where one would not work.

  3. Quote, drawing and dates

    What it costs, what it looks like on your space, and when it arrives. Sides can be closed later with Sombra blinds, priced per side, so you can leave that open for now.

  4. Deposit confirms it

    Your sizes and colour go to manufacture. White or anthracite grey, freestanding or wall-mounted.

  5. Manufacture and delivery

    Built to the measurements from the site check, then delivered to you.

  6. Our crew installs it

    The same company that quoted it fits it. You are not handed a flat-pack and an afternoon.

Next step

Inquire about the HDE.

Tell us the opening, what it is mounting to and how the space gets used. We come back with the configuration that fits and the figures for your site.

Inquire now
Next step

Start with a site check.

Every outdoor system depends on structure, mounting surface, exposure and how you actually use the space. Tell us the space and we’ll tell you which system fits, and where one wouldn’t work. Warranty cover varies by system and project scope; we’ll tell you exactly what yours carries before you commit.

Message us on Messenger

Metro Manila

Studio A Residences, 65 Mariveles St.,
Brgy. Highway Hills, Mandaluyong City

Mezzanine, 322 Sto. Rosario St.,
Brgy. Plainview, Mandaluyong City

Office and product showcase. Visits by appointment.

Cebu

Gen. Lim St., Villa Aurora,
Brgy. Kasambagan, Cebu City

Office and product showcase. Visits by appointment.

Follow

Skybass PhilippinesSunbass Pergola@skybassinc
Inquire now