
Luxury
The same principle stepped up: heavier section, IP67 motor, and LED integrated the full length of the inner beam.
- Double-layer blades throughout, rotating 0–90°
- Motorised, IP67-rated 24 V
- 150 x 150 mm post at the larger fixed sizes
- Gutter integrated in a 190 mm beam
- LED the full length of the inner beam
- Water and electricity separated inside the post
- Dark grey RAL 7016
- White RAL 9016
- 3x4 m
- 4x4 m
- 6x4 m
- 8x3 m
- 8x4 m
Final configuration is confirmed on site before anything is quoted.
- Aluminium throughout
- Gutter integrated in the beam
- Load rating confirmed for your configuration
- Assessed, supplied and installed by Skybass
- Warranty confirmed in writing before you commit
Description
The same system, specified up.
A 150 mm post, a 190 mm beam with the gutter inside it, and double-layer blades on an IP67 motor.
The difference at night is the LED, integrated the full length of the inner beam. Water and electricity run on separate paths inside the post.
Specification
| Frame | Extruded aluminium, powder-coated |
|---|---|
| Finish | Dark grey RAL7016 or white RAL9016 |
| Post | 120 x 120 x 1.4 at 3x4; 150 x 150 x 2.0 at the larger fixed sizes |
| Beam (gutter integrated) | 190 x 124.28 x 2.5 |
| Louver blade | 135 x 30 x 1.2 at 3x4; 159.9 x 38 x 1.3 at the larger sizes. Double-layer throughout |
| Blade rotation | 0–90° |
| Operation | Motorised, IP67 24 V |
| Load | 80 kg/m² at 3x4; 120 kg/m² at the larger fixed sizes |
| Wind | 101 km/h, tested |
| Lighting | Integrated LED, full length of the inner beam |
| Sizes | 3x3 · 3x4 · 3x8 · 4x4 · 4x6 · 4x8 m |
| Detailing | Water and electricity separated in the post; rubber seals to the blade edges |
All dimensions in millimetres, given as width x depth x wall thickness.
Manufacturer product ratings, not a guarantee for any installation. What your site carries depends on structure, mounting, fall and exposure. We give you the figures for your exact configuration.
What decides the fit
- A fixed structure. We check footings, posts and the landing surface on site.
- Closed louvers drain into the frame gutter. That water needs somewhere to go.
- Span, post spacing and covered area are linked.
- Wind and load figures are for your exact configuration, not a generic number.
- Luxury covers five fixed sizes up to 8x4 m. An opening outside those is HDL: the same system, built to order.
Installed by Skybass.

Before you inquire
Where does the water go when the louvers are closed?
The gutter is formed into the beam and rubber seals run to the blade edges, so a closed roof drains through the frame. Where that water discharges is part of what we check on site.
What wind and load will it take?
The table gives the manufacturer's product ratings for this build. Those are product ratings, not a guarantee for any installation. We give you the figures for your exact configuration.
What warranty does it carry?
Cover varies by system and project scope. You get exactly what yours carries, in writing, before you commit.
How a Sunbass Luxury gets built
Tell us the space
Width, depth, and what is above and below it. A photo from where you stand is usually enough to start.
We come and measure
A site check on the actual structure, mounting surface, fall and exposure. This is what decides which build fits, and where one would not work.
Quote, drawing and dates
What it costs, what it looks like on your space, and when it arrives. Sides can be closed later with Sombra blinds, priced per side, so you can leave that open for now.
Deposit confirms it
Your sizes and colour go to manufacture. White or anthracite grey, freestanding or wall-mounted.
Manufacture and delivery
Built to the measurements from the site check, then delivered to you.
Our crew installs it
The same company that quoted it fits it. You are not handed a flat-pack and an afternoon.
Inquire about the Luxury.
Tell us the opening, what it is mounting to and how the space gets used. We come back with the configuration that fits and the figures for your site.
Inquire now

