A dark Luxury Type awning extended from the stone-and-timber-clad wall of a house, over the balcony below
Awnings: Luxury Type

Luxury Type

The only cased build that reaches 3.5 m. A full housing over the biggest front bar in the range.

  • The only cased build that reaches 3.5 m of projection
  • 145 x 67 mm front bar, the biggest in the range
  • Three-part housing that closes over the fabric and the arms
  • Ø70 mm roller, galvanised and thicker-walled on the wide units
  • Hand crank standard, tubular motor and remote optional
  • White, black or grey frame
Sizes
  • Made to order

Final configuration is confirmed on site before anything is quoted.

  • Aluminium frame and cassette
  • Acrylic-coated fabric, water-repellent, UV-resistant
  • Assessed, supplied and installed by Skybass
  • Warranty confirmed in writing before you commit
Description

Depth and a closed case, without choosing.

A three-part housing, 167 x 16 mm on top and 153 x 15 mm below over a 150 x 55 mm back profile, on a 145 x 67 x 3.3 mm front bar. That front bar is the biggest of the three builds. Closed, it reads as a hard line against the wall.

The point of it is 3.5 m of projection with the mechanism still enclosed. Full Case tops out at 3.0 m because its case cannot swallow longer arms. Non Case gets to 3.5 m by having no case at all. This one does both.

The standard build runs on a hand crank. A tubular motor and remote are an upgrade, and on a wide run they are worth taking, because an awning that does not get retracted takes weather it should not. It is still retracted in strong wind, and we give you the limit for your site.

Specification
Minimum size2.0 x 1.5 m
Maximum size6.0 x 3.5 m
HousingTop 167 x 16 x 2.5 mm, bottom 153 x 15 x 2.5 mm, back 150 x 55 x 3.0 to 7.0 mm
Roller tubeØ70 mm, graded by width: 1.0 mm wall under 4.0 m, galvanised 1.0 mm from 4.0 m, galvanised 1.2 mm from 5.0 m
Front bar145 x 67 x 3.3 mm
Support armsBack 65.8 x 31.2 x 2.2 mm, front 58.8 x 27 x 2.0 mm (58.8 x 26 x 2.0 mm on 3.5 m units)
Fabric holder143 x 37 x 2.0 mm
OperationHand crank standard. Tubular motor and remote optional
FabricPolyester or acrylic, PU-coated and UV-protective
Fabric weight280, 300 or 320 g/m²
Frame finishWhite, black or grey
MountingWall or ceiling brackets, angle adjustable
Wind-load ratingNot published

Awning sections in millimetres, width x depth, with wall thickness where the manufacturer states it. Roller tubes are given as a diameter. Maximum projection is gated by width, so the buildable size for your opening is confirmed on survey.

What decides the fit
  • The mounting surface has to carry the load. We check it before quoting.
  • For sun and light rain. Retracted in strong wind. We give you the limit for your unit and site.
  • Maximum width and projection depend on the type and the opening.
  • Exposure matters. Full afternoon sun needs a different build from a sheltered balcony.
  • Luxury Type is what we specify for a storefront or a terrace taking full afternoon sun and driven rain, and for any opening that needs the full 3.5 m without leaving the roller tube and arms exposed.
Our work

Installed by Skybass.

A Luxury Type awning extended over the balcony of a stone-clad house, seen from belowThe same Luxury Type awning retracted into its hard closed profile against wood claddingA Luxury Type awning retracted into its cassette, mounted under the glass canopy of a modern house
Questions

Before you inquire

Why is this the one you specify for an exposed frontage?

Because it is the only build that does not make you choose. Full Case encloses the mechanism but stops at 3.0 m. Non Case reaches 3.5 m with the roller tube and arms left in the open. Luxury Type gives you 3.5 m with a housing that still closes on them, on the biggest front bar in the range at 145 x 67 mm. On a frontage taking full afternoon sun and driven rain, those are the two things you want at once.

Is it motorised?

Not as standard. The standard build is a hand crank, and the tubular motor with a remote is an upgrade. Worth taking on a wide run, because a crank on a long projection is a chore nobody does twice a day, and an awning that does not get retracted takes weather it should not be taking.

What changes on the wider units?

The roller tube. It stays Ø70 mm throughout, but it is galvanised from 4.0 m of width and goes to a 1.2 mm wall from 5.0 m, because a wider span puts more bend into the tube. The front arm also steps from 58.8 x 27 mm to 58.8 x 26 mm on the 3.5 m projection units.

Can it stay out in strong wind?

No. It is still a retractable awning: it is retracted in strong wind, and we will give you the limit for your unit and your site.

What warranty does it carry?

Cover varies by system and project scope. You get exactly what yours carries, in writing, before you commit.

Next step

Inquire about the Luxury Type.

Tell us the opening, what it is mounting to and how the space gets used. We come back with the configuration that fits and the figures for your site.

Inquire now
Next step

Start with a site check.

Every outdoor system depends on structure, mounting surface, exposure and how you actually use the space. Tell us the space and we’ll tell you which system fits, and where one wouldn’t work. Warranty cover varies by system and project scope; we’ll tell you exactly what yours carries before you commit.

Message us on Messenger

Metro Manila

Studio A Residences, 65 Mariveles St.,
Brgy. Highway Hills, Mandaluyong City

Mezzanine, 322 Sto. Rosario St.,
Brgy. Plainview, Mandaluyong City

Office and product showcase. Visits by appointment.

Cebu

Gen. Lim St., Villa Aurora,
Brgy. Kasambagan, Cebu City

Office and product showcase. Visits by appointment.

Follow

Skybass PhilippinesSunbass Pergola@skybassinc
Inquire now