The Full Case awning, extended below its cassette
Awnings: Full Case

Full Case

The housing closes around the fabric and the arms when the awning retracts, keeping sun, dust and rain off them.

  • The housing closes over the fabric and the arms
  • 120 x 64 mm front bar, against 70 x 34 mm on the open build
  • Hand crank, or a tubular motor with crank override
  • Projection to 3.0 m. Luxury Type is the cased build that reaches 3.5 m
  • PU-coated fabric in 280, 300 or 320 g/m²
Sizes
  • Made to order

Final configuration is confirmed on site before anything is quoted.

  • Aluminium frame and cassette
  • Acrylic-coated fabric, water-repellent, UV-resistant
  • Assessed, supplied and installed by Skybass
  • Warranty confirmed in writing before you commit
Description

The mechanism goes away when you close it.

A 165 x 48 mm top profile over a 157 x 125 mm bottom, on a 120 x 64 mm front bar. Retracted, the fabric and arms fold up into the housing and it shuts on them.

The fabric spends its closed hours out of the sun and the arm joints stay clear of dust and rain. Hand crank as standard, tubular motor if you want it, and the motor keeps a crank override.

It stops at 3.0 m of projection. The case has to swallow the arms, and the longer arms a 3.5 m reach needs will not fit this one. Luxury Type is the cased build that goes deeper.

Specification
Minimum size2.0 x 1.5 m
Maximum size6.0 x 3.0 m
HousingTop 165 x 48 mm, bottom 157 x 125 mm
Roller tubeØ70 or Ø78 mm
Front bar120 x 64 mm
Support arms60 x 31 mm and 51 x 26 mm
OperationManual crank, or tubular motor with crank override
FabricPolyester or acrylic, PU-coated and UV-protective
Fabric weight280, 300 or 320 g/m²
Frame finishWhite powder-coat standard, optional colours
MountingWall or ceiling brackets, angle adjustable
Wind-load ratingNot published

Awning sections in millimetres, width x depth, with wall thickness where the manufacturer states it. Roller tubes are given as a diameter. Maximum projection is gated by width, so the buildable size for your opening is confirmed on survey.

What decides the fit
  • The mounting surface has to carry the load. We check it before quoting.
  • For sun and light rain. Retracted in strong wind. We give you the limit for your unit and site.
  • Maximum width and projection depend on the type and the opening.
  • Exposure matters. Full afternoon sun needs a different build from a sheltered balcony.
  • Full Case is the sensible default for a wall that gets real weather at up to 3.0 m of projection. Past that, with the case kept, it is Luxury Type.
Our work

Installed by Skybass.

An extended retractable awning with its cassette and white end caps visible along the wall
Questions

Before you inquire

What does the case actually buy me?

The thing you only notice years in. When the awning retracts, the fabric and the folding arms fold up into the housing and it shuts on them, so the fabric spends its closed hours out of the sun, and the arm joints stay clear of dust and rain instead of weathering in the open.

Why does it stop at 3.0 m when the open build reaches 3.5 m?

Because the housing has to swallow the arms. Reaching 3.5 m takes longer arms, and longer arms will not nest inside this case when it closes. Non Case has no case, so no limit. Luxury Type reaches 3.5 m on a bigger housing, which is part of what the bigger housing is for. If you need 3.5 m and you want it enclosed, that is the build.

Can it stay out in strong wind?

No. A retractable awning is for sun and light rain; it is retracted in strong wind.

What warranty does it carry?

Cover varies by system and project scope. You get exactly what yours carries, in writing, before you commit.

Next step

Inquire about the Full Case.

Tell us the opening, what it is mounting to and how the space gets used. We come back with the configuration that fits and the figures for your site.

Inquire now
Next step

Start with a site check.

Every outdoor system depends on structure, mounting surface, exposure and how you actually use the space. Tell us the space and we’ll tell you which system fits, and where one wouldn’t work. Warranty cover varies by system and project scope; we’ll tell you exactly what yours carries before you commit.

Message us on Messenger

Metro Manila

Studio A Residences, 65 Mariveles St.,
Brgy. Highway Hills, Mandaluyong City

Mezzanine, 322 Sto. Rosario St.,
Brgy. Plainview, Mandaluyong City

Office and product showcase. Visits by appointment.

Cebu

Gen. Lim St., Villa Aurora,
Brgy. Kasambagan, Cebu City

Office and product showcase. Visits by appointment.

Follow

Skybass PhilippinesSunbass Pergola@skybassinc
Inquire now